This is a half liter size. Apply Endurance over thoroughly dried paint or stain. Twenty four hours of drying is recommended before you apply to ensure no moisture is trapped between the paint and the finish coat. Up to six layers can be used for the ultimate protection of a surface. To apply, always work in the direction of the grain, using a foam brush, staining pad or high quality synthetic brush. Apply thin, even layers. Allow each layer to dry completely prior to application of the next layer. After every second layer, lightly sand with a very fine sandpaper or piece of brown kraft paper. Burnish your final coat with a piece of brown kraft paper (a grocery bag is great, low cost source of kraft paper, but use unprinted side). Use 4-6 layers on surfaces such as a the tops of a family dining table, coffee table or end table.
Endurance is the finish recommended for cabinetry and table tops. It is a satin finish for indoor use. Endurance is non-yellowing. If you desired an aged appearance, we suggest you use our Clear Glaze tinted under the Endurance to achieve the desired effect. Endurance needs one week to fully cure.